SMPS MPPS V5 Tuning Remap Chip tuning CAN Flasher is a USB chip tuning interface. This is good clone working with V5 version of software. This interface lets you to read and write memory of a car computer through the diagnostic connector.    Product Detail>> Item No.: SE33-B
Start From: 1

TMS374 ECU Decoder is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.    Product Detail>> Item No.: SE41
Start From: 1

SKS-3058, diagnostic tool of testing analyzing equipment of automobiles EECS and ECU, is specially designed for engineers who repair automobiles EECS and ECU.    Product Detail>> Item No.: SE40
Start From: 1

BMW EWS Reader work with EWS alarm system equiped with EWS Immobilizers from 1995 year: E34(5xx), E36(3xx),E38 (7xx), E39 (5xx), E46 (3xx), E53 (X5), Z4, Mini Cooper, Rover 75, Range Rover.BMW EWS Reader supports reading and writing EWS3 and EWS3+ memory via unit connector (K-line).    Product Detail>> Item No.: SE39
Start From: 1

MAGPro2 is a chiptuning system composed of several modules.
Serial OBDII programming tool that allows the communication with a vast number of vehicles, allowing the reading and writing through the use of simple connections with simple and fast software.    Product Detail>> Item No.: SE36
Start From: 1

UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.2    Product Detail>> Item No.: SE37
Start From: 1

The WELLON Programmers are affordable,reliable,and fast universal device programmers.They are designed to operate with the Intel Pentium-based IBM-compatible desktop computers and laptops.No interface card is necessary to plug the module into a PC (this feature is especially handy for laptop users). The menu-driven software interface makes them easy to operate.    Product Detail>> Item No.: SE35
Start From: 1

The LabTool-48UXP lets you select the verify voltage after you have programmed the device. The Vcc voltage can be 2.0V to 6.5V. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.    Product Detail>> Item No.: SE34
Start From: 1

SMPS MPPS V5.0 Tuning Remap Chiptuning CAN Flasher is a USB chip tuning interface. This is good clone working with V5.0 version of software.This interface lets you to read and write memory of a car computer through the diagnostic connector    Product Detail>> Item No.: SE32
Start From: 1

Mercedes Benz W164 Can Filter (for 2006 model of ML164、SLK171、E211、R230)    Product Detail>> Item No.: SE17
Start From: 1

MCU controlled Interface for Mercedes Benz Carsoft 7.4 BRAND NEW.

YOU CAN READ/ERASE ALL FAULT CODES!!!!

READ ECU INFORMATION!!!!

    Product Detail>> Item No.: SE25
Start From: 1

MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.
    Product Detail>> Item No.: SE26
Start From: 1

FLASHER 1260 is an easy hardware for auto chip tunning.
    Product Detail>> Item No.: SE01
Start From: 1

KWP 2000 Plus ECU REMAP Flasher Tuning Tool
USE the KWP2000 PLUS YOU CAN DO:

A. Read and analys your current ECU software;
B.Upgrad the ECU software with a re-mapped file ;
C.Repair ECUs with software problems or corruption
    Product Detail>> Item No.: SE02
Start From: 1

Now with Mercedes ZGW !!! (see below)
    Product Detail>> Item No.: SE19
Start From: 1

Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage calculation integrated in soft.
    Product Detail>> Item No.: SE04
Start From: 1

This CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN, not on K line.
    Product Detail>> Item No.: SE21
Start From: 1

MOTOROLA Programmer, 9(S)12 Programmer    Product Detail>> Item No.: SE15
Start From: 1

Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
The newest version for the software is 3.0 now
    Product Detail>> Item No.: SE07
Start From: 1

BDM 100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
    Product Detail>> Item No.: SM01
Start From: 1